Most orders ship out free by tomorrow, October 4th
  • Front
  • Side
  • Profile
  • Shown with CR-4111

  • Chic Compliments
  • +2

MD-9153 Ceiling Medallion

30" Diameter
Drill a hole?
Price:$89.99
  • Quantity

    Order Today - Ships Tomorrow

    Delivery on:  
    Zip Code:
    Shipping address is Residential
    Shipping & Return Details

    Specifications

    • TypeCeiling Medallion

    • StylePellet

    • Diameter30"

    • ColorWhite

    • MaterialPolyurethane

    • Depth2-1/4"

    • Inside DiameterCanopy Max: 6-1/4"

    • Inside HoleNo Hole

    • Weight6.2

    Videos

    • Product Video Placeholder Image
      Product Video
    • Product Video
      Making your Ceilings Sensational!

    Product Description

    Quick Facts

    • Made from dense durable Polyurethane
    • Lasts a lifetime
    • Mold and mildew resistant
    • Lightweight and easy to install
    • Safe to install indoors or out
    • Exquisite detail and design consistency
    • Won't crack or splinter like wood or hard plastic

    The MD-9153 Ceiling Medallion is 30" in diameter and has a depth of 2-1/4".

    Ceiling medallions are the perfect finishing touch for your interior design project. Use them to add luxury and charm to a ceiling fan or light fixture, or get creative and try them on walls for a pleasing, modern look that will impress all of your guests! Their innovative and lightweight design makes it easy to mount them to vertical surfaces.

    Some of our medallions come with pre-cut holes, while others do not. If you need a hole in your medallion to install with a fixture or fan, we'd be more than happy to drill it for you -- just select that option before adding the medallion to checkout. Or, if you'd prefer, you may drill the hole yourself. Polyurethane is durable and easy to work with, and you only need a hole large enough for the wiring of your fixture to fit through.

    Installing Without Damaging the Finish
    We recommend using a generous amount of construction adhesive during installation and holding the medallion in place, momentarily, while the adhesive takes effect. Then, you can use low-tack painter's tape to continue holding the medallion in place while the adhesive dries.

    Installation With a Fixture
    If you are installing the medallion with a ceiling fan, chandelier, or light, make sure the power is shut off at the breaker before attempting installation. Turning off the light switch only WILL NOT prevent you from being shocked. If you have any doubts or need further assistance, please consult an electrician. You may need longer bolts or a longer threaded tube than came with your fixture to accommodate the thickness of the medallion. You can get these at most local home improvement stores.

    25 Year Limited Warranty

    You're making a beautiful upgrade to your home and we're here to help protect that investment. We guarantee that your polyurethane millwork will be free from manufacturing defects for twenty-five years from the original date of purchase.

    Warranty Conditions and Limitations

    This warranty covers material defects in our polyurethane products when used in standard applications where temperatures do not exceed 150°F. It does not cover labor, consequential or incidental damages. This warranty is not transferable and applies to the original purchaser only.

    • Polyurethane products are for decorative uses only.
    • Polyurethane products need a finish coat of paint during installation; it is the purchaser's responsibility to make sure their paint works well with the product (test and let dry on a small piece first).
    • Before installation, allow your polyurethane product to acclimate to room temperature for 15 minutes.
    • All polyurethane moldings must be installed with tight fitting joints (see installation instructions) as well as adhesive between the joints to prevent seams from expanding during changes in season.

    We're Ready to Help

    Unlike a car, not much can go wrong with a polyurethane product since polyurethane doesn't absorb moisture and won't be affected by insects. However, in the rare event that you do encounter a defect with your product, we're here and ready to help. Just give us a call and we'll work with you to identify the problem and, in case of defect, supply you with replacements.


    RETURNS

    At uDecor.com, we know that projects take a while, and sometimes plans change. To start a return, please call us at 1-877-550-0600 or email returns@udecor.com; we'll be happy to assist you!
    • 90 day return window with no restocking fees
    • Products must be unused/new and in their original boxes
    • Customer is responsible for return shipping cost (we are happy to help arrange shipping)
    • Partial returns where the quantity discount tier would change are refunded the difference between the original total and the total based on the kept quantity (see example)

    INSTRUCTIONS-
    Materials & Tools Needed
    Screw Gun / Brad Gun
    Adhesive / Caulking Gun
    Caulking (paintable latex)
    Utility Knife
    Drill / Hole Saw

    Painting
    Many of our medallions have very intricate details and can be very difficult to finish once installed. We recommend painting your medallion before installing it. A high-quality spray paint, Latex or faux finishes work great. You can then touch up any areas that need attention after the installation is complete.

    Adhesive
    You can use any adhesive that is rated for use with polyurethane (check the back of the label) -- we have had great success using Red Devil Construction Adhesive, Loctite Powergrab and PL Premium Polyurethane Adhesive, all of which work well and are readily available at most home improvement stores.

    Installation - No Fixture
    Run a 1/4" continuous bead of adhesive around the outer edge and randomly in other areas on the back of the ceiling medallion. Press the medallion up into place using a few finish nails or screws to secure the medallion while the adhesive dries. Once the medallion is in place you can caulk any holes and around the perimeter of the medallion using a paintable caulking. Touch up the paint if needed.

    Installation - With Fixture
    If you are installing the medallion with a ceiling fan, chandelier or light, make sure the power is shut off at the breaker before attempting installation. Turning off the light switch WILL NOT prevent you from being shocked. If you have any doubts call an electrician.

    Medallions are for decorative purposes only and cannot support the weight of a fan or light fixture. Your fixture must be supported by a support or junction box in the ceiling.

    Many of our medallions come with solid centers to allow you to cut the correct size hole for your application. Take the bracket for your ceiling fan or light fixture and trace the area that you want to remove from the ceiling medallion. You will need a hole large enough for the wiring and holes for the bolts to pass through to affix your bracket to the junction box. The polyurethane material is easily cut so you can use a hole saw or a drill to punch out a hole. The hole doesn't have to be perfect since the fixture canopy will cover the hole.

    Dry fit your medallion in place on the ceiling to make sure all of the wiring and fixture parts will fit as planned. Run a 1/4" continuous bead of adhesive around the outer edge and randomly in other areas on the back of the ceiling medallion. Feed through all the wiring and then press the medallion up into place, using a few finish nails or screws to secure the medallion while the adhesive dries.

    Once the medallion is secure, attach your fixture bracket to the junction box. You may need longer bolts or a longer threaded tube that came with your fixture to accommodate the thickness of the medallion. Once the fixture bracket is in place, attach your ceiling fan or light fixture to the bracket and complete the wiring per your fixture's instructions. Once the wiring is complete slide the canopy into place to cover the hole of the medallion. Prior to doing the final finish work, turn on the breaker and test to make sure your fixture has been properly wired.

    Now that you have your medallion and fixture installed, caulk any holes and around the perimeter of the medallion using a paintable caulking. Touch up the paint if needed.

    CUSTOMER REVIEWS

    6

    5 out of 5 stars
    5 star
    100%
    4 star
    0%
    3 star
    0%
    2 star
    0%
    1 star
    0%

    Teresa P.Virginia Beach, VAApril 9, 2024

    5 out of 5

    Great Medallion!

    We wanted to install this medallion in our dining room but discovered that it was too large for our room. The quality of the product was superior, shipping was prompt and customer service was superb.

    Connie N.Leesburg, VAApril 14, 2022

    5 out of 5

    Looks great—what a difference

    Everyone who sees it is amazed at how elegant and professional it looks. My husband installed it and it is just what I have wanted there.

    Judith G.Hernando, FLOctober 2, 2021

    5 out of 5

    Perfect

    We needed to relocate our dining room fixture. This medallion covered the old hole allowing us to finally center the table under the fixture. Customer service was excellent!

    Carla I.Greenwood, INDecember 21, 2020

    5 out of 5

    Love it!

    The medallion shipped the very next day! I spray painted it black before we had it installed with our new chandelier. The medallion makes the whole light fixture!!

    Malte S.Deltona, FLMarch 19, 2018

    5 out of 5

    Nice large medallion.

    The only struggle we had make the usual light fixture to work with the thick profile of the medallion. Other than that it's a nice sturdy foam medallion that we attached with construction glue and pin nails to hold until the glue cures. It looks great and was easy to paint.

    John W D.Cleveland, OHApril 18, 2016

    5 out of 5

    New Cluster Home

    We have a tray ceiling in both the front entrance and our master bedroom. We needed to set off the ceiling with a medallion. This one was it! My painter painted it white then used two shades darker than the wall color for the outer rim of the medallion. Then the small 'beads' hit painted each one with the gold-brass to match the individual fixtures. They are gorgeous!