TypeDrop In or Glue Up
Dimensions2' x 2'
Print/DownloadProduct Spec Sheet
We recommend using Designer Border Ceiling Tile - Antique Nickel as a border tile for Cornerstone Ceiling Tile - Antique Nickel.
For tiles that either project down into the room or are coffered (recess up into the ceiling), the finished look is often better when using a border tile for partial tiles on the room's perimeter.Watch our video on Border Tiles
Perfect for both commercial and residential applications, these uDecor Tiles are constructed from .03" vinyl. Their lightweight and durable material make these tiles easy to install. uDecor tiles are also waterproof, which means they are washable and will not stain from mildew or humidity. These tiles are a perfect choice for anyone who wants to add that designer touch at an amazing price.
These are designed to fit standard 15/16" - 1" T-bar Ceiling Systems. If you have a 2x4 drop grid, use our easy to install grid dividers easily convert your system to fit these 2x2 tiles.
Our uDecor tiles are incredibly lightweight, which means there is less strain and stress during the installation process. Also, you can easily move them if you ever have to access the backside of the grid.
Easy to Install
These tiles are flexible which makes installation a breeze and ideal for areas with minimal clearance, unlike traditional mineral fiber tiles that easily break, crumble, or chip. Slide them into the suspension system alone or beneath an existing tile. You can also install these directly to your ceiling using the glue up method, just grab construction adhesive such as Red Devil General Purpose Construction Adhesive. Cutting ceiling tiles has never been easier - scissors or tin snips get the job done best.
Say goodbye to those nasty water stains and bowed ceiling tiles from water damage. uDecor tiles are virtually impervious to water and mildew, giving you peace of mind that your tiles will look great for many years to come.
Our uDecor tiles are durable. Made out of high-quality pvc, these are sure to stand the test of time.
Easy to Clean
With water and a quick wipe down, your tiles will maintain their new and fresh look. This is another benefit to PVC tiles compared to porous mineral fiber tiles. Enjoy the appeal of clean, beautiful, long-lasting tiles.
Our Cornerstone tile is a timeless design that is suited for Direct Mount or Grid application. Its versatile style makes it a popular choice for a wide variety of spaces.
Things to Consider:
If installing in a ceiling grid, make your grid look as elegant as your tiles by painting your grid or using Our Designer Collection Grid Strips. If you are planning to direct mount these to your ceiling, you will love the way that they overlap. No seams to conceal, so there is no need to buy grid strips.
For direct mount applications, save a trip to the store by purchasing our Red Devil brand Direct Mount Adhesive. If you would prefer to pick up something locally, PL Premium Advanced (Loctite brand) works great.
Since your ceiling will more than likely have partial tiles at the perimeter, you will have to cut your tiles to size for those areas. This can sometimes create a gap running into the wall with certain styles. Since the Cornerstone style does have a recession in the design, it is a good idea to consider our Designer Border Tile for the edges.
Materials used in the construction of the tile(s) are 100% waterproof.
Class A Fire Rated
Tiles have been tested in accordance with ASTM 84e and scored a Class A rating for flame spread and smoke generation.
5 Year Limited Warranty
You're making a beautiful upgrade to your ceiling and we're here to help protect that investment. We guarantee that your ceiling tiles will be free from manufacturing defects for a period of five years from the original date of purchase.
Warranty Conditions and Limitations
This warranty covers material defects in the ceiling tile when used in a standard ceiling application. It does not cover labor, consequential or incidental damages. Please note that painting the ceiling tile will void the warranty and may change some of its properties like its fire rating.
We're Ready to Help
Unlike a car, there is very little that can go wrong with these ceiling tiles. However, in the rare event that you do encounter a defect with your tiles, we are here and ready to help. Just give us a call and we will work with you to identify the problem and, in case of defect, supply you with replacement tiles.
We know that projects take a while, and sometimes plans change. That's why, in most cases, we give our customers a 90 day grace period to return products. The products must be unused/new and in their original boxes.
We are unable to replace items that have been modified or installed, so please review all the contents of your shipment for damage and to verify that the items received are correct. Damaged items or items shipped in error that are not modified will be replaced promptly.
Custom products do not qualify for a refund if returned. Custom products include, but are not limited to, the Imagination Series, Leather & Wood Tiles, and Custom Tile categories.
Partial Returns of Items with Quantity Discounts
In the event that an order qualified for and received a quantity discount, special consideration must be taken when accepting a partial return of the specific product that qualified for the quantity discount. If a customer's request to return a specific amount of product breaks the initial quantity required to qualify for a discount, it is possible that the customer will not receive a refund for the returned items. This is because we have extended a generous discount for a bulk buy, which may no longer applicable if a portion of the product is returned.
A refund involving an order that included a quantity discount can be examined in the following example:
Bill purchased 400 of a particular ceiling tile which cost $ 4.25 per tile (a $ 0.74/tile discount when purchasing 400 or more). His order also qualified for free shipping and he was not subject to sales tax. The order total was $ 1700.00.
After Bill finished his project, he decided that he did not need 30 of his tiles, and he wishes to return them. We must treat Bill's order as if he originally purchased 370 ceiling tiles, which means he would have not qualified for the $ 0.74 per tile quantity discount. If Bill had only purchased 370 tiles, the tiles would have cost $ 4.99 per tile and his order total would have been $ 1846.30.
In this particular case, Bill's new order total ($ 1,846.30) would actually be more than what he originally paid ($ 1,700.00). While we wouldn't charge Bill the difference when returning the tiles, we also would not be able to provide any refund. It would be better for Bill to keep the tiles and save on the return shipping.
When and how will a customer be refunded?
If products are returned within 90 days of the purchase, the customer's credit card will be refunded electronically. If products are returned toward the end of the 90 day period, and the refund does not take effect within 90 days of the purchase date, the refund will be issued by check and sent by USPS. Returns may take up to 2 weeks to be processed.
Packaging Items for their Return
Please be careful when packaging items for returns. You will be responsible for damage incurred during shipping, so please package the items accordingly. Retain the paperwork that the shipping company gives you, especially the tracking number. Remember, you will be responsible for the items until we receive them.
Making A Return
Need to return extra tiles or perhaps select a different style? Just give us a call and we'll be glad to help!
ProLite Series Only-
Insulation Above The Tiles
Our ProLite Series of tiles are our most popular tiles due to their flexibility, color options, and price point. Due to the tiles' thin construction, regular fiberglass insulation is too heavy to lay on top of the tiles. If your space requires insulation above the tiles you have a few options:
Our SoniGuard insulation is specifically built and designed to work above our ProLite Series and can be purchased from our website.
If your tile design is flat on the back, you can slide these tiles into place under your existing tiles, leaving the existing tiles to bear the weight of your insulation.
You can place small furring strips that lay across the top of the grid to use as support for insulation. 1x1 or 1x2 wood strips provide enough support for insulation.
You can push your existing tiles up out of place and turn them slightly to rest on top of the grid system. This would allow the insulation to rest on top of these tiles.
You can secure the insulation to the "real ceiling" of your space, leaving the tops of the tiles clear of any need to support weight.
Once you have determined how you tiles will be installed (empty grid, under existing tiles, existing tiles pushed up) it's time to get started. Place all of the full sized tiles first, leaving the border and partial tiles for last. Having all the full sized tiles in place will push the grid into its natural position. If you cut and install border and partial tiles first, you may find that they are the wrong size once all the other tiles are in place.
Border / Partial Tiles
Use a tape measure or straightedge to measure the size your tiles need to be. Transfer those measurements to the back side of the tile with a pencil or grease pencil.
Our ProLite Series is very easy to cut with regular household scissors. Follow your lines for a nice neat finish. You can also use a razor knife if needed.
Can Lights / Recessed Lights
In many homes grid mounted lights are very popular. You should choose a tile design that has a large enough flat area for the light bezel to lay flush once installed. You should also choose lights that have grid mounting brackets so that the weight of the light is supported by the grid system and not the tile.
Place your light fixture and tile in the grid system. Adjust the light to its final position and mark this on the backside of your tile. Use the appropriate size template to mark the hole in the tile. Many times the light bezel or a roll of tape will be close to the correct size. Use scissors or a razor knife to cut the opening.
We do not recommend can light fixtures that are not designed for direct contact with insulation nor do we recommend using halogen lighting. Unshielded fixtures, especially those using halogen lighting represent a risk of fire or melting the tiles.
High Temperature Areas
Our ProLite Series tiles are designed not to be affected by temperatures up to 120F. In some cases there may be localized ceiling and tile temperatures that exceed the tiles designed operating temperature. This can happen around heat registers, above stoves and ovens, around high temperature lighting, and in environments that intentionally have higher than normal temperatures, like heat spas, and Hot Yoga/Bikram studios. Contact us if your space may be subjected to any of these conditions.
Decorative Grid Strips / Grid Tape
These self adhesive strips/tape are designed to cover up the ceiling grid. Each strip is 2 feet long with an attractive embossed pattern and the grid tape is sold in 100 foot long rolls.
The adhesive on the back is to aid with installation, and IS NOT a permanent adhesive. Small dabs of tile adhesive should be applied to the back of the strips or tape. A small dab at each end, and 2 dabs spaced equally in the middle of the strip are adequate to permanently secure the strip to the ceiling. The ceiling grid tape should have a small dab of adhesive applied every 6 inches. The adhesive backing will allow for the strip to stick to the ceiling long enough for the tile adhesive to cure. Failure to use tile adhesive may result in the failure of the strips or tape to adhere to the ceiling.
Approximately 1 Tube of adhesive per 125 strips (250 linear feet) is needed. We recommend Red Devil General Purpose Construction Adhesive (available here) or Loctite Power Grab All Purpose Adhesive (available locally in most big box stores).
Make sure your grid system is clean before starting application. Rubbing alcohol or 409 work really well to remove any dust or oils.
For best results, make sure the temperature in the room is between 60 - 80 degrees Fahrenheit and low humidity. Do not peel the backing off until you are installing the strip. Any contamination of the back side of the strips will compromise the performance of the adhesive.
The decorative strips should be butted up to one another. Do not overlap the strips. Make sure to always start at the same end of the strip. You may have to trim each strip slightly, so always put the strip in place before peeling off the backing so you can see if any needs to be trimmed.
Take your first strip. The dot at the end of the strip should be directly over the intersection of the 4 tiles. Once you have the strip lined up, peel the backing from the self adhesive and apply small dabs of tile adhesive to the back of the strip (see above). Run all the strips one direction first.
Finish off by installing the strips that run perpendicular to the tiles. Each strip will need to be trimmed, so keep a pair of scissors or snips in your pocket and cut off the dotted end.
Start in a corner and work one direction. Apply small dabs of adhesive every 6 inches. Trim the tape to fit when you reach the end of a run. Finish of by covering the remaining cross T's (shorter grid sections). Using the same gluing technique as above. Trim the tape to fit the space exactly. Do not overlap the tape in any areas.
Adhesives -vs- Staples
We recommend adhesive when installing our tiles. Although stapling is an option, adhering tiles with adhesive is the recommended method, yielding the most favorable results. (Staples can crack the tiles). We recommend "Red Devil General Purpose Construction Adhesive" available here.
Materials: Needed for Installation
Surface Types and Methods of Installation
Sheetrock, Drywall, Plaster, Cement
Install ceiling tiles directly to ceiling using an approved adhesive. Verify on the adhesive of your choice whether it will work for both the ceiling tile material and the material to which it is to be adhered.
Wood Paneling, Plywood
Install ceiling tiles directly to ceiling using adhesive.
Wood Furring Strips
Furring strips can be used to mount the tiles to. This method is a great solution for ceilings that are not quite perfectly flat and would require a lot of work to fix. Furring strips can be leveled with shims when installing, giving a nice flat area for the tiles to adhere to.
The furring strips should be spaced out the width and length of your tile, minus any overlap that may be required. If you are installing 2x4 tiles, we recommend putting up furring strips in a 2x2 pattern so the middle of the tile has something to adhere to.
Popcorn / Stucco / Cottage Cheese Ceilings
Ceiling tiles should never be applied directly to popcorn ceilings. The ceiling tiles need a flat, even surface to be applied to. There are several ways to create an appropriate surface. You can remove the ceiling texture, add a new layer of drywall over the existing surface, or install furring strips.
If you decide to remove the existing texture, it would be a really good idea to test the material for asbestos before going to work. The process of removing the material is messy and time consuming and depending on your local laws, you may need to have a licensed removal contractor do the work. Please check into it before you start removal.
Before You Begin
Your surface needs to be smooth, clean, and dry. Test out your adhesive and tile combination in a small area before committing to doing the whole ceiling.
Planning Your Layout
Take the time to plan your layout. One of the most important things to know is that not every ceiling tile is exactly 2"x2" or 2"x4". Most tiles are slightly smaller so that they are versatile; working for both glue-up and drop grid applications. Be sure to check the size of your tile before laying out your ceiling.
With Grid Strips (Available for ProLite, Legacy, and Designer Series ceiling tiles)
If you plan on using grid strips to cover the seams, be sure to check the spacing needed between the tiles. Use a grid strip to verify the space needed to allow the grid strips to lay flat.
Without Grid Strips (An option for Legacy and Designer Series tiles, and recommended for Manchester ceiling tiles)
Place a few tiles on the floor and check the size and overlap. The overlap length can vary depending on the tile design and/or personal preference.
Note: The thickness compounds where 4 tiles overlapping tiles meet for the Legacy and Designer tiles. With careful planning, you can trim 2 or 3 tiles to minimize the thickness. This step is also a personal preference. For most installers, the ceiling height makes the overlap thickness unnoticeable.
Planning Your Layout
Knowing the actual size and overlap of the tile is very important for direct mounting. You will be marking a grid on the ceiling to keep everything nice and straight. If you are off by only 1/8 of an inch on each tile, after 8 tiles you will be off a whole inch. Be as precise as you can with your measurements.
Use grid paper and map out your ceiling. Indicate the position of lights, vents, and any other fixtures or obstructions on the ceiling. The location of these obstacles will determine your layout and overall look of the finished ceiling. Make sure you take the border into consideration when laying out the tile pattern. A larger border is often preferred over a small one. Use your drawing to plan an even border around the room.
Note: If the ceiling tile you have chosen has a large amount of relief, you may want to consider the use of a flatter border tile in the spaces where there are lights, vents or other obstructions in the ceiling. Tiles with a significant relief design may preclude the use of them when confronted with a surface mounted accessory.
Consider the main, most visible area of your space as well as the longest runs of tiles. These are usually the lines you want square to your starting wall. At some point, you will need to pick a wall to start from and use it as the base for your lines. Most rooms are not square and many times tile layout is a compromise of room shape and border tile size needs.
Once your pattern has been decided, use a chalk line to snap your rows. Make sure to space your chalk lines according to your size of tile. If you are overlapping tiles during installation, you will have to reduce your line spacing to account for the tile overlap.
Note: Both of these layouts are out of square by the same amount, only the size of the border tiles are different. The layout on the right shows how much easier it is to spot the imperfection in the alignment. The smaller the border tile, the greater it will magnify how out of square a room is.
Installing the First Tile
Make sure all your surfaces as well as your hands are clean. Any oils on the ceiling or tiles, even the ones from your skin, can affect the performance of the adhesive. Latex gloves are a great option during the installation process, keeping oils off the tiles and keeping your hands clean of adhesive.
Take your first tile and apply a bead of adhesive all the way around the perimeter of the backside of the tile. Make the bead 1/8" to 3/16" in size. If the tile center lays flat on the ceiling, add a 4" "X" to the center section with adhesive. If the tile has a design where only a few areas touch the ceiling, place dabs of adhesive on those sections. Keep a damp towel handy to clean up any adhesive that may seep out.
Gently place the tile close to its final location next to your chalk lines. Lightly press the tile to the ceiling as you slide it into position. This lets the adhesive spread out and smear a bit. Once you are satisfied that the tile is in place, firmly press the tile to the ceiling, rubbing out any bumps in the adhesive.
Second Tile - With Overlap
Use the same gluing technique as the first tile. Place the second tile next to your first one, overlapping the edge(s) by your predetermined amount. Your grid should have marks where your tile edge should be. Continue to place full sized tiles, adjusting as necessary, to remain lined up on your grid lines.
Second Tile - Without Overlap
Use the same gluing technique as the first tile. Place the second tile next to your first one. The edges of each tile should be touching. Don't press the tiles together with force. Use the Grid Strip to confirm you are placing the tiles with the correct spacing. Continue placing full sized tiles adjusting as necessary to remain lined up on your grid lines. For non-overlapping tiles, creating a small space to remain on your layout is okay. These gaps will be covered by the Grid Strips when finished.
Measure the open space from the installed tile to the wall. Make sure to take measurements at each end of the space, as the measurements are often different. Make sure the tile is facing the correct direction. Transfer your measurements to your border tile and cut it.
Grid strips are designed to cover up the seams between non-overlapping ceiling tiles. Each strip is 2 feet long and most designs come with an embossed pattern.
The adhesive on the back is to aid with installation and IS NOT a permanent adhesive. Small dabs of tile adhesive should be applied to the back of the strips. A small dab at each end and 2 dabs spaced equally in the middle of the strip are adequate to permanently secure the strip to the ceiling. The adhesive backing will allow for the strip to stick to the ceiling long enough for the tile adhesive to cure. Failure to use tile adhesive may result in the failure of the strips to adhering permanently.
Make sure your tiles are flat and any adhesive that has oozed out between the cracks has been cleaned up. If your tiles have been up for a while, take some time to clean the area that the strips will be applied to. Rubbing alcohol or 409 work really well to remove any dust or oils.
The decorative strips should be butted up to one another. Do not overlap the strips. Make sure to always start at the same end of the strip. You may have to trim each strip slightly, so always put the strip in place before peeling off the backing so you can see if any trimming is needed.
Most uDecor moldings are made from architectural polyurethane, which makes them waterproof and very long-lasting. Order 1 foot samples of your favorite crown molding, casing, or baseboard to make sure you love it!
We sell over 800 ceiling tiles in various styles, colors, and materials. Check out our waterproof ceiling tiles as well as the Imagination Collection, featuring printed ceiling scenes. Don't forget Accessories!
Bring your ceiling to life with a ceiling medallion or ceiling dome. Accent your design with a ceiling ring or ceiling relief molding. For those with more lavish tastes, our Michelangelo Medallions bring a flavor of old-world charm to your ceiling.
All of our accent elements are built from the same durable, low maintenance polyurethane as our moldings. They'll maintain a fresh, vibrant look for years to come; and their competitive prices enable you to create the ambience you're looking for without going over budget.