TypeCorner
Breadth4-1/4"
StyleRope
ColorWhite Primer
MaterialPolyurethane
Ceiling Height8' - 9"
Height3"
Width3"
Our MC-1020 Corners is 3" wide and 3" tall with a white Primer finish.
uDecor accent features are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to be very durable and 100% waterproof. This material is delivered pre-primed for paint. It is installed with architectural adhesive and/or finish nails. It can also be finished with caulk, spackle and your choice of paint, just like wood or MDF. A major advantage of polyurethane is that it is safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew.
For more how to videos, visit our DIY learning center
24
Service and product was very helpful and good. Product arrived on time as stated.
We were very happy with the product and it looks very nice in our living room.
We were very happy with the product and it looks very nice in our living room.
These make the job so much easier!! Thanks
We have done three rooms with uDecor crown and these corners make the job so much easier.
Mc-1020 corners not fitting with cm-1020 crown molding. waste of Money. I wish I can give 0 star.
Mc-1020 corners not fitting with cm-1020 crown molding. waste of Money. I wish I can give 0 star.
Hated both the inner and outer corners. The thickness of the top and bottom as well as most of the contour of the corners do not match the molding. Some of the corners are over 1/8 inch thicker than the identical feature on the molding. The corners took more time to work, fill and sand than installing the molding. I have some 45 degree cuts that I made myself and wished I had of made all the 90 degree cuts myself and not wasted the time and money on the pre-manufactured corners.
Hated both the inner and outer corners. The thickness of the top and bottom as well as most of the contour of the corners do not match the molding. The corners took more time to work, fill and sand than installing the molding. I have some 45 degree cuts that I made myself and wished I had of made all the 90 degree cuts myself and not wasted the time and money on the pre-manufactured corners.
No comment
The corner pieces make it so easy to install without having to cut 45 degree angles and match the corners
The corners matched the crown molding in pattern and looked like they would have made working through corners easier; unfortunately, the corners were not the same thickness as the crown molding. They made the corners appear sunken in.
Working the corners is always the challenge. While these corners were square, the walls were not. You'll probably need to make some adjustment cuts to make these work and remember that molding caulk will hide many gaps and flaws.
The corners complete the look of the room and make installation even easier.
This company service second to none!!! FAST SHIPPING. Stuff you can’ t find in a big box store!!!!!