TypeCasing or Wall Relief
Flat moldings cover a large group of moldings that can be used in a variety of areas such as; casing, chair rail, wall relief, ceiling relief, and door and window trim. These versatile moldings are the backbone of interior design.
The WR-9015 Molding is a 2-1/2" tall molding. All of our moldings are lightweight, yet very strong to withstand the impact of everyday living (vacuum cleaners, chairs, kids, etc.). The lengths make them easy to work with so you can install them quickly and they are very consistent so you can neatly finish any seams for a professional installation
uDecor moldings are manufactured with a dense architectural polyurethane compound (not Styrofoam). Polyurethane is durable and 100% waterproof. The material can be sanded to shape just like wood.
A major advantage of polyurethane is that it will not expand, constrict or warp over time with changes in temperature or humidity. It's safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew.
Installation is simplified with the use of modern adhesives. Small finish nails are used to secure the molding while the adhesives set. See below for installation instructions.
This molding is delivered pre-primed for most paints. Always test your paint on a small section to make sure there are no compatibility issues with the paint and primer. Most home latex paints work great on our molding.
Before you Begin -
When planning for chair rail or other moldings, inspect the walls and/or ceiling to see if any vents or other objects are within the footprint of the moldings. Consider mitered returns at the ends of any molding runs that may be interrupted by these items. Allow 48 hours for the molding to acclimatize to the conditions where it will be installed.
Since working at waist level is usually easier than working over your head, we recommend painting the molding before beginning the installation process. Imperfections can be touched up after you have completed the install.
ALWAYS test a section of the front of the molding with your paint choice before committing to painting all of your molding. Most home latex paints work great on our molding.
Joining Pieces -
Always use an appropriate amount of adhesive on the end of any of the molding being joined end to end. This prevents the molding from separating as the house walls expand and contract from temperature changes.
Last Piece on a Wall -
For a tight fit and seams, cut the last piece that is going to be on a wall just a little long. 1/16 to 1/8 of an inch is usually enough to allow you to snap that piece in place making sure all your joints stay nice and tight.
Lining Up The Pieces -
When two pieces of molding are being joined together in a run (end to end) leave the last two feet of the open end of the installed molding loose so you can have some alignment room when you join the next piece.
Finishing The Job -
Use Spackle to fill in nail holes and painters caulk on the edges between the molding and the wall and ceiling. Touch up these areas with paint.
POLYURETHANE PRODUCTSuDecor, Inc. provides a LIMITED LIFETIME WARRANTY to the original purchaser of our polyurethane products. This LIMITED LIFETIME WARRANTY provides that the polyurethane material will be free from manufacturer defects in material and workmanship under normal and expected use. This warranty does not encompass all of the products sold by uDecor, Inc. and is exclusive to our polyurethane products only. Other products may carry their own manufactures warranty. Call us at 1-877-550-0600 for details.
uDecor, Inc. provides a LIMITED 5 YEAR WARRANTY to the original purchaser on the FINISH of our polyurethane products. This LIMITED WARRANTY provides that the FINISH on the polyurethane material will be free from finishing defects under normal and expected use for a period of five (5) years from the date of purchase. This warranty does not cover failure of a customer applied finishing system caused by material incompatibility.
If the material proves to be defective and has been installed and existed within the bounds of the above requirements, the customer should contact uDecor, Inc. in writing or by phone within 30 days of discovering the material defect. uDecor, Inc. may require digital images, a sample of the material or a combination of material and images to be sent to uDecor, Inc. for evaluation. Upon review of materials and installation methods, uDecor, Inc. will determine if replacement, repair or refund is appropriate. uDecor, Inc. is not liable for the cost of labor, transportation, or any other expenses incurred in conjunction with the purchase, use and installation of the material.
This limited warranty does not cover damage from the result of mishandling in transportation, acts of God, customer modifications, vandalism, misuse, abuse, improper maintenance, unreasonable care, or other causes that did not arise from manufacturer defects in workmanship and/or materials. No person or entity is authorized to change, modify, or amend the terms of this limited warranty in any manner.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty applies to our polyurethane based materials only.
Contact: uDecor, Inc. • 8302 Espresso Drive, Suite 130 • Bakersfield, CA. 93312 • 877-550-0600 • www.uDecor.com
Most uDecor moldings are made from architectural polyurethane, which makes them waterproof and very long-lasting. Order 1 foot samples of your favorite crown molding, casing, or baseboard to make sure you love it!
We sell over 800 ceiling tiles in various styles, colors, and materials. Check out our waterproof ceiling tiles as well as the Imagination Collection, featuring printed ceiling scenes. Don't forget Accessories!
Bring your ceiling to life with a ceiling medallion or ceiling dome. Accent your design with a ceiling ring or ceiling relief molding. For those with more lavish tastes, our Michelangelo Medallions bring a flavor of old-world charm to your ceiling.